1984-Montero · body and frame a · страница 6 из 7 · Открыть оригинал PDF ↗
FRAME ALIGNMENT
Проверка
:
1. Check crossmembers for cracks or damage.
2. Check crossmember as illustrated for dimension;.
(15W521) -.
3. Check the side frames, crossmembers, and brackets for
cracks or separated welds, by tapping them with a test
ham,mer. (15W5 18) If in doubt, polish the. frame surface
well and check it with a crack detecting agent (liedcheck,
etc.).
4. Check the frame for bends and distortion.
‘-- Correct if not within specifications. .
.I
INSTALLATION
1. Install the front suspension crossmember.
NOTE -’
,
It isimportant that the bolts be installed from therear.
.‘. .’ 3:
(15W519)
2. When replacing the floor plug, be sure to apply an appro-
priate amount of semi drying sealant.
REPAIR
When a crack is found in the frame, it should be repaired as
follows:
Оригинальная страница руководства
