1984-Montero · prop and UV a · страница 4 из 8 · Открыть оригинал PDF ↗
COMPONENTS
REMOVAL
1. Place the free wheel hubs in the FREE posit:ion and set
the transfer lever to “2H”.
2. Make mating marks on the flange yoke and the differen-
tial companion flange. (1 ODSOS)
3. Detach the propeller shafts from the front and rear dif-
ferential carrier assemblies.
4. Remove the propeller shafts.
Caution
Be careful not to damage the lip of the transmission oil seal
or the lip of the transfer oil seal.
Do not allow foreign matter to enter the trakmission or
transfer.
Оригинальная страница руководства
