Haynes_Manual_for_Montero_1988_and_Pickup_1987 · auto tranny · страница 6 из 8 · Открыть оригинал PDF ↗




















7.5 The rear band adjusting screw is accessible after
removing the transmission oil pan

the positions from “P” down to “L” and back. If it does not shift smoothly
adjust the shift interlock cable (see illustration).
Adjustment
7 Bands -adjustment
Refer to illustrations 7. I, 7.5 2nd 7.9
Note: A/ways support the vehicle withjackstands.
Refer to illustration 6.2
2 To adjust the interlockcable placetheshift lever in the”P”positron and
measure the clearance at point “A” and “B” at the steering column (see
illustration).
3 -Loosen the interlock cable end nuts and align the cable end to the
specifications listed in this Chapter.
4 Tighten cable nuts and check for proper shift lever movement as de-
scribed in step I.
Kickdown bands
Note: When the carburetor throttle is opened quickly (90% or more), the
kickdown valve opens app/y/ng fluid to the shift valves. The transmission _
then downshifts according to the veh/c/e speedand throttle pressure from
4to3,3to;!or2to f.-
1 Theadjustrng screwforthe krckdown band is located on the leftside off
the transmrssron (see Illustration).

