MANUALS · INTERIOR [52A] · страница 10 из 32 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

TRIMS TRIMCLIPREMOVAL/INSTALLATIONPROCE- DURESES2GIAA

The type of clip shown in the illustration; which is used for the
installation of trim, should be removed and installed by the
following procedures describedbelow.

REMOVAL

(1) Use a cross-tip ( +) screwdriver to push inward the pin (at
the centre of the trim clip) to a depth of about 2 mm (0.08
in:}

(2) Pull the trim clip outward to remove it;
Caution

Donotpushthepininwardmorethannecessary
because it may damage the grommet, or the pin may
fall in, if pushed too far

INSTALLATION

(1)With the pin pulled out, insert the trim clip into the hole in
the trim.

(2) Push the pin inward until the pin's head is flush with the
grommet:

(3) Check whether the trim is secure

Оригинальная страница руководства