Pajero II Workshop Manual 1991 · Колёса и шины · страница 4 из 4 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SERVICEADJUSTMENTPROCEDURES EJIFAAA

TYRE INFLATION PRESSURE CHECK

Check the inflation pressure of the tyresIf it is not within the
standard value, make the necessary adjustment

TYRE WEAR CHECK

EJIFBAA

Measure the tread depth of tyres

Limit:1.6mm (0.06 in.)

If theremaining tread depth is less than the limit, replace the
tyre

NOTE

When the tread depth of tyres is reduced to 1.6 mm (0.06 in)
or less,wear indicators appear.

WHEEL RUNOUT CHECK

E3IFCAA

Jack up the vehicle so that the wheels are clear of the floor.
While slowly turning the wheel, measure wheel runout with a
dial indicator.

Limit:

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

	Aluminum wheels	Steel wheels
Radial	1.0 mm (0 039 in)	1.2 mm (0.047 in.)
Lateral	1.0 mm (0.039 in )	1,2 mm (0.047 in.}

wheel runout exceeds the limit,

replace the wheel,

Оригинальная страница руководства