Pajero II Workshop Manual 1998 Supplement · PWJE9086 I PAJERO 98 CHASSIS 54 · страница 2 из 5 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

3Set the distance between the screen and the centre f the
fog lamps as shown in the illustration_

Inflate the tyres to the specified pressures and there
should be no other load in the vehicles other than driver
or substituted weight of approximately 75 kg placed in the
driver's position.

5.With the engine running at 2,000 rlmin, aim the fog lamp:

6_Check if the beam shining onto the screen is at the
standard value.

Standard value:

(Vertical direction)
100 mm below horizontal (H)
(Horizontal direction)

Parallel t0 direction of vehicle travel

NOTE

The horizontal direction is non-adjustable. If the deviation
of the lamp beam axis exceeds the standard value, check
to be sure that the mounting location or some other point
is not defective.

Caution

When making the aiming adjustment, be sure to mask
those lamps which are not being adjusted

BULB REPLACEMENT

Remove the fog lamp.
2Remove the cover:

Unhook the spring which secures the bulb and then
remove the bulb.

Caution

Do not touch the surtace of the bulb with hands or
dirty gloves: If the surtace does become dirty, clean it
with alcohol or thinner, and Iet itdrythoroughly
before installing

Оригинальная страница руководства