1984-Montero · engine 2'6 a · страница 42 из 53 · Открыть оригинал PDF ↗
Right Silent Shaft and Oil Pump
1. Install oil pump gears to oil pump body and align timing
marks. (5EN028)
Caution
If timing marks are out of .aligmnent, phase of s:ilent shaft
will be out of phase, and vibration will result.
2. Install oil pump cover to,body and tighten screws.
3. After installing pump cover, position pump assembly in
same position as it was originally installed on engine and
put approx. 10 cc (0.6 cuin.) of clean engine oil in
delivery port. (SEN029)
4. Install right silent shaft into oil pump driven gear.
5. Install driven gear and ‘silent shaft tightening bolt and
tighten to specified torque.
6. Apply engine oil to journal of right silent shaft.
7. Install silent shaft and oil pump as an assembly to cylinder
block. Use care to avoid damaging rear bearing as the
shaft is installed.
8. Tighten oil pump mounting bolts to specified torque.
Torque specification
Oil fitimp mounting bolts . . . . . . . . . . . . . . . . .
lo-lo.5 Nm (7.5-8.5 Ift.lbs.)
Оригинальная страница руководства
