1987-Montero · Cooling a · страница 11 из 18 · Открыть оригинал PDF ↗

Проверка
N07GDAC
I. If the valve opens at all at room temperature the part
should be replaced.
2. An obviously malformed part or one with cracks or damage
should be replaced.
3. Clean off any rust or encrustation on the valve.
4. Immerse the thermostat in a container filled with water.
Raise the temperature of the water while stirring it
checking to ensure that the temperatures at which the
valve begins to open, and at which it is fully open [(the fully
opened valve should be raised at least 8 mm (.31 in.)] are
within the specified values.
Standard values : Opening temperature Fully open
NOTE
c
.(
88C” ( 190°F) si’
100°C (212°F) or more .$
‘0. .I
y’;. :
The height of the valve when fully opened should be”;,:
1.c ?
calculated by first measuring its height when fully closed
and determining the difference.
SERVICE POINTS OF INSTALLATION N07GEAA
5. INSTALLATION OF THERMOSTAT
Install the thermostat to the intake manifold as illustrated.
N07GEAA
Caution
The thermostat flange fits over the manifold seat;
ensure that the thermostat is not installed at an angle.











