1989-Montero-Parts-Manual · 3.0l v6 · страница 3 из 40 · Открыть оригинал PDF ↗
cable. Label and disconnect all vacuum hoses from throttle body and
upper intake manifold.
2) Disconnect O2 sensor connector. Remove EGR pipe and
gasket. Remove ignition coil. Remove engine oil filler neck bracket.
Remove throttle body, leaving coolant hoses connected. Remove throttle
body gasket. Remove upper intake manifold plenum mounting bolts and
nuts.
3) If necessary, remove EGR valve and pipe. Remove upper
intake manifold plenum brackets. Remove upper intake manifold and
gasket.
Inspection & Installation (Montero & Pickup)
Clean all gasket mating surfaces. Inspect for damage and
cracks on all mounting surfaces. To install, reverse removal procedure
using new gaskets. Tighten bolts and nuts to specification. See TORQUE
SPECIFICATIONS (MONTERO & PICKUP) table at end of article.
Fig. 1: Exploded View of Upper Intake Manifold & Components (DOHC)
Courtesy of Mitsubishi Motor Sales of America, Inc
Оригинальная страница руководства
