1989-Montero-Parts-Manual · 3.0l v6 · страница 4 из 40 · Открыть оригинал PDF ↗
Fig. 2: View of Upper Intake Manifold & Components (DOHC Turbo, SOHC)
Courtesy of Mitsubishi Motor Sales of America, Inc
Removal (3000GT)
1) Remove air intake hose. Remove throttle body and gasket
with control cables and coolant and vacuum hoses attached. See Fig. 2.
2) Remove EGR and EGR pipe (if equipped). Disconnect power
brake hose. Label and disconnect vacuum hoses and electrical
connections. Remove upper intake manifold plenum retaining bracket(s),
mounting bolts and nuts. Remove upper intake manifold.
Inspection & Installation (3000 GT)
Clean all gasket mating surfaces. Inspect for damage and
cracks on all mounting surfaces. To install, reverse removal procedure
using new gaskets. Install throttle body gasket with projection on
gasket facing upward beyond throttle body mounting surface. Tighten
bolts and nuts to specification. See TORQUE SPECIFICATIONS (3000GT)
table at end of article.
LOWER INTAKE MANIFOLD
Оригинальная страница руководства
