Haynes_Manual_for_Montero_1988_and_Pickup_1987 · 20ENGINE · страница 17 из 18 · Открыть оригинал PDF ↗
3 Raise the vehicle and support it securely on jackstands, then position
a jack under the engine oil pan. Place a large block of wood between the
jack head and the oil pan, then carefully raise the engine just enough to
take the weight off the mounts. Warning: DO NOTplace anypatiofyour
body under the engine when it’s supported only by a jack!
4 Checkthe mounts to see if the rubber is cracked, hardened or sepa-
rated from the metal backing. Sometimes the rubber will split right down
the center. Check that the rod on the front mount is not bent.
5 Check for relative movement between the mount plates and the en-
gine or frame (use a large screwdriver or pry bar to attempt to move the
mounts). If movement is noted, lower the engine and tighten the mount
fasteners.
6 Rubber preservati.ve may be applied to the mounts to slow deteriora-
tion.
Оригинальная страница руководства
