BELT ADJUSTMENT TABLE

1991-Montero-Service-Manual · alternator and regulator · страница 10 из 14 · Открыть оригинал PDF ↗

Application	(1) New Belt Deflection: In. (mm)
Colt, Colt 200 & Summit ......	............... .28-.35 (7.1-8.9)
Mirage
1.5L .......................	............... .28-.35 (7.1-8.9)
1.6L .......................	.............. .35-.45 (8.9-11.4)
Colt Vista ...................	............... .28-.34 (7.1-8.6)
Eclipse & Galant
1.8L .......................	.............. .32-.43 (8.1-10.9)
2.0L .......................	.............. .35-.45 (8.9-11.4)
Montero ......................	............... .22-.32 (5.6-8.1)
Pickup & Ram-50
2.4L .......................	............... .28-.39 (7.1-9.9)
3.0L .......................	............... .32-.39 (8.1-9.9)
Precis .......................	............... .28-.32 (7.1-8.1)
Stealth & 3000GT
DOHC .......................	............... .16-.22 (4.1-5.6)
SOHC .......................	............... .24-.35 (6.1-8.9)
(1) - Deflection measured with on belt run.	22 lbs. (10 kg) pressure applied midway

Таблица в оригинале

TROUBLE SHOOTING

NOTE: See TROUBLE SHOOTING - BASIC PROCEDURES article in the

GENERAL INFORMATION section.

TESTING (ON-VEHICLE)

ALTERNATOR TO BATTERY CONTINUITY TEST

NOTE: Check alternator wire harness connections and drive belt

tension and ensure battery is fully charged before

performing test.

1) Turn ignition switch to OFF position. Disconnect negative
battery cable. Remove output lead from alternator terminal "B". See
Fig. 10. Install a 100-amp ammeter in series to terminal "B" and
disconnected output lead. Install positive lead of ammeter to terminal
"B" and negative lead to disconnected output wire.

Fig. 10: Identifying Alternator Terminals
Courtesy of Chrysler Motors.

2) Install a digital voltmeter between alternator terminal

"B" and positive battery terminal. Install positive voltmeter lead to

Оригинальная страница руководства