1991-Montero-Service-Manual · wheel alignment specifications and procedrues · страница 1 из 7 · Открыть оригинал PDF ↗
1991 Mitsubishi Montero
1991 WHEEL ALIGNMENT
Specifications & Procedures
Chrysler Motors: Colt, Colt Vista, Colt 200,
Ram-50, Stealth, Summit
Mitsubishi: Eclipse, Galant, Mirage, Montero,
Pickup, Precis, 3000GT
WHEEL ALIGNMENT PROCEDURES
NOTE: On vehicles with electronic chassis controls, ensure all
systems are functional before attempting to adjust riding
height or wheel alignment.
CAMBER ADJUSTMENT
Montero, Pickup & Ram-50
1) Check tire inflation. Place front wheel on turning radius
gauge, and level vehicle (unladed). On 2WD models, remove hub cap and
cotter pin. On 4WD models, remove free wheeling hub assembly.
2) On all models, measure camber with camber/caster/kingpin
gauge attached. See appropriate WHEEL ALIGNMENT SPECIFICATIONS table.
If camber is not within specification, remove shock absorber mounting
nut and lock nut.
3) Compress shock absorber and loosen upper arm mounting
bolts and nuts. Adjust camber by increasing or decreasing shims
between upper arm shaft and crossmember. See Fig. 1.
CAUTION: Difference in shim thickness between front and rear must be
.16" (4 mm) or less. DO NOT use more than 3 shims at one
location.
Fig. 1: Adjusting Camber & Caster (Pickup & Ram-50 Shown; Montero
Camber Adjustment Similar)
Courtesy of Mitsubishi Motor Sales of America.
Оригинальная страница руководства
