1991-Montero-Service-Manual · wheel alignment specifications and procedrues · страница 6 из 7 · Открыть оригинал PDF ↗
| Front ............... | ...... 1/2 ........................ 0 to 1 |
|---|---|
| Rear ................ | ...... -1 ................. -1 1/2 to -1/2 |
| Caster (Degrees) ..... | ... 1 15/16 ............. 1 7/16 to 2 7/16 |
| Toe-In (In. (mm)) | |
| Front ............... | ..... 0 (0) ........ -1/8 to 1/8 (-3 to 3) |
| Rear ................ | .... 1/8 (3) ......... 0 to 1/4 (0 to 6.4) |
| Toe-In (Degrees) | |
| Front ............... | ....... 0 .................... -1/4 to 1/4 |
| Rear ................ | ...... 1/4 ...................... 0 to 1/2 |
Таблица в оригинале
WHEEL ALIGNMENT SPECIFICATIONS TABLE (MONTERO)
| Application | Preferred Range |
|---|---|
| Camber (Front) (1) | ............. 1 .................. 1/2 to 1 1/2 |
| Caster (1) ......... | ......... 2 15/16 ......... 1 15/16 to 3 15/16 |
| Toe-In (Front) (2) | ....... 7/32 (5.5) .. 3/32 to 11/32 (2.5-8.5) |
| Toe-In (Front) (1) | ......... 7/16 ................ 3/16 to 11/16 |
| Toe-Out on Turns ( | 1) |
| Inner ........... | .......... 32 1/2 ...................... ..... |
| Outer ........... | ............ 29 ........................ ..... |
| (1) - Measurement in | degrees. |
| (2) - Measurement in | inches (mm). |
Таблица в оригинале
WHEEL ALIGNMENT SPECIFICATIONS TABLE (RAM-50 & PICKUP)
| Applicati | on | Preferred Range |
|---|---|---|
| Two Wheel | Drive | |
| Camber | (Front) (1) | ......... 11/16 .............. 3/16 to 1 3/16 |
| Caster | (1) ...... | ........... 2 1/2 .............. 1 1/2 to 3 1/2 |
| Toe-In | (Front) (2) | ...... 7/32 (5.5) .. 3/32 to 11/32 (2.5-8.5) |
| Toe-In | (Front) (1) | ......... 7/16 ................ 3/16 to 11/16 |
| Toe-Out | on Turns ( | 1) |
| Inner | ........... | ........... 37 ......................... ..... |
| Outer | ........... | ......... 30 3/8 ....................... ..... |
| Four Whee | l Drive | |
| Camber | (Front) (1) | ........... 1 .................. 1/2 to 1 1/2 |
| Caster | (1) ...... | ............. 2 ........................ 1 to 3 |
| Toe-In | (Front) (2) | ....... 7/32 (5.5) .. 3/32 to 11/32 (2.5-8.5) |
| Toe-In | (Front) (1) | ......... 7/16 ................ 3/16 to 11/16 |
| Toe-Out | on Turns ( | 1) |
| Inner | ........... | ........... 30 ......................... ..... |
| Outer | ........... | ........... 27 ......................... ..... |
| (1) - Mea | surement in | degrees. |
| (2) - Mea | surement in | inches (mm). |
Таблица в оригинале
WHEEL ALIGNMENT SPECIFICATIONS TABLE (PRECIS)
| Application | Preferred Range |
|---|---|
| Camber (Degrees) | |
| Front ............... | ......... 0 ................... -1/2 to 1/2 |
| Rear ................ | ...... -11/16 ................. -1 to -3/16 |
| Caster (Degrees) | |
| With P/S ............ | ...... 1 11/16 ........... 1 3/16 to 2 3/16 |
| Without P/S ......... | ......... 1 .................. 1/2 to 1 1/2 |
| Toe-In (In. (mm)) |
Таблица в оригинале
Оригинальная страница руководства
