1991-Montero-Service-Manual · ac compressor servicing · страница 24 из 25 · Открыть оригинал PDF ↗
Fig. 18: Sanden 5-Cylinder Compressor
Courtesy of Chrysler Motors.
SANDEN 7-CYL CLUTCH COIL & BEARING R & I
Removal
1) Hold clutch hub stationary and remove shaft nut. Remove
clutch plate using Clutch Plate Puller (09977-21110). Remove clutch
shims and bearing dust cover. Remove external front housing snap ring.
2) Install puller, and pull drive pulley assembly off. Detach
clutch coil lead from compressor housing. Remove clutch coil snap ring
and clutch coil. If necessary, invert drive pulley assembly and remove
snap ring and bearing.
Installation
1) Ensure clutch coil protrusion aligns with hole in
compressor housing, and install clutch coil snap ring. Install drive
pulley assembly using Drive Pulley Installer (09977-21811).
2) install external bearing snap ring. Using Seal Installer
(09977-21800), install bearing dust cover. After dust cover
Оригинальная страница руководства
