MANUALS · LUBRICATION [12] · страница 4 из 14 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

If below the minimum level,supply with specifiedoil.
Specified oil: (API classification)
<4G64 , 6G72, 6G74>SG or higher

SG or higher
CDOrhigher

<4056, 4M4O>

Caution

Refilling beyond the maximum level has adverse effect
on engine performance:

<Petrol-powered vehicles >

5.Run the engine at idle and stopThen allow some time
and check oil levelagaintomake sure it iswithin the
specified range

6.Check that the engine oil is not excessively contaminated
and not mixed with the coolant or petrol,and that it has
proper viscosity.

ENGINE OIL REPLACEMENTE12FAAD

Warm up the engine_

2Drain the engine oil by removing the filler cap and then
removing the drain plug:

Caution

Use care as oil could be hot;

3.Replace the drain plug gasket and install so it faces in
the direction shown in the illustration.Then tighten the
drain plug to the specified torque

Fill with new engine oil:

Specified oil:(API classification)
<4G64, 6672, 6674>
<4056, 4M4O>

SG or higher
CD or higher

Oil quantity:

<4G64>4.5 dm? (4.8 U.S. qts-, 4.0 Imp: qts )
<6672>4.3dm'(4.5 USqts , 3.8 Imp. qts )
<6G74>4.3 dm' (4.5 U.S: qts , 3.8 Imp. qts )
<4056>5.5 dm? (5.8 U.S: qts , 4.8 Imp. qts:)
<4M40>5.5dm?(5.8 USSqts , 4.8 Imp: qts )
[excluding volume of oil in the oil
filter and oil cooler]

5_Race the engine fora few minutes
Stoptheengine andchecktheoillevelwithlevel
gauge

Оригинальная страница руководства