1987-Montero · Body a · страница 16 из 81 · Открыть оригинал PDF ↗
2. At the facing surface of the front fender and door panel,
loosen the installation bolts at the door side, and then
adjust by increasing or decreasing the number of shims.
3. At the facing surfaces of the door and rear pillar outer
panel, adjust by loosening the striker installation screws.
4. Adjust the engagement of the striker and door latch by
increasing or decreasing the number of striker shims,
and/or by moving the striker.
ADJUSTMENT OF DOOR GLASS
NZOFFAB
I, Remove the door trim and waterproof film. (Refer to P.23-
33.)
2. Raise the door glass fully, and then adjust the following
items so that the door glass fits evenly into the window
glass runchannel all the way around.
Loosen the screws and/or bolts securing the window and
rear lower sash.
Move the window, rear lower sash and the sub roller guide
(vehicles without ventilator window) of the window regula-
tor to adjust the door glass position.
ADJUSTMENT OF VENTILATOR WINDOW
N23FJAA
1. Remove the door trim and waterproof film. (Refer to P.23-
33.)
2. Remove the ventilator window. (Refer to P.23-35.)
3. Adjust the ventilator window by turning the adjusting nut
so that the ventilator window can be operated smoothly.
NOTE
Fix the adjusting nut by bending the lock washer after the
adjustment.
Оригинальная страница руководства
