1984-Montero · clutch a · страница 4 из 11 · Открыть оригинал PDF ↗
CLUTCH PEDAL INSPECTION AND ADJUSTMENT
1. Measure the clutch pedal height and free play.
Clutch pedal height A . . . . 186-191 :mm (7.3-7.5 in.)
Clutch pedal free play B . . . . . . . 5- 10 mm (.2-,.4 in.)
.’ -
NOTE
The clutch pedal is so made that no adjustment of free play is
possible.
2. If the clutch pedal height and free play are not within the
standard value, adjust as follows:
(1) Turn the pedal stopper bolt back to a position where
it does not contact the pedal arm. (OSW503)
(2) Loosen the push rod lock nut and adjust the pedal
height to the standard value by turning the push rod.
(OSYOO7)
(3) Turn the pedal stopper bolt until it comes into
contact with the pedal arm, and then tighten the lock
nut.
3. After making the adjustment, depress the clutch pedal
several times and check the clutch pedal to: floorboard
clearance is within the standard value range when the
clutch is disengaged.
Pedal to floorboard clearance C when pedal is de-
pressed . . . . . . . . . . . . . . . . 35 mm (1.4in.) ormore
4. If the clutch pedal to floorboard clearance ,is less than
the standard value, air mixture in hydraulic system or
defective clutch assembly is suspected.
Bleed the hydraulic system or repair the clutch assembly.
BLEEDING
Whenever the clutch tube, the clutch hose, and/o:r the clutch
master cylinder have been removed, or if the clutch pedal is
spongy, bleed the system.
1. Loosen the bleeder screw at the clutch release cylinder.
2. Push clutch pedal down slowly until all air is expelled.
3. Hold clutch pedal down until bleeder screw is retightened.
4. Refill clutch master cylinder with recommended brake
fluid.
Caution
Use the recommended brake fluid. Avoid using a mixture. of
the recommended fluid and other fluid.
Recommended brake fluid . . . . . . . . . . . . . .‘. DOT 3
Оригинальная страница руководства
