1984-Montero · clutch a · страница 11 из 11 · Открыть оригинал PDF ↗
an
4. Connect the clutch hose to the release cylinder at the
stepped portion shown in the illustration. (OSWSO8)
5. Torque all parts to specifications during assembly,
6. Bleed the air from the system. (Refer to p. 6-4.)
7. Adjust the clutch pedal height. (Refer to p. 6-4.)
CLUTCHRELEASECYLINDER
Removal and Disassembly
1. Remove eye bolt and gaskets and disconnect clutch hose
from clutch release cylinder.
2. Remove two bolts securing the clutch release cylinder
and clutch housing and remove clutch release cylinder
assembly.
3. Remove the boot and push rod and take out piston and
spring.
Проверка
1. Check inside cylinder body for rust or scoring.
2. Check piston cup for wear or deformation.
3. Check piston for rust or scoring.
Оригинальная страница руководства
