1989-Mitsu-Factory Manual · cooling system · страница 17 из 18 · Открыть оригинал PDF ↗
ENGINE COOLANT TEMPERATURE GAUGE UNIT
(1) Immerse the engine coolant temperature switch in oil and
then heat (by using a gas stove flame or similar method)
so as to increase the oil temperature.
(2) Measure the resistance if within the standard value.
Standard value :
At 70°C (158°F) 104-cl3.5 n
At 115°C (239°F) 23.8k2.5 i-l
Caution
The oil used above should be engine oil and should be
stirred well while being heated; do not heat more than
necessary.
ENGINE COOLANT TEMPERATURE SENSOR
(For engine control)
Raise the water temperature and measure the resistance if
within the standard value.
Standard value :
At 20°C (6B’F) 2.45-cO.24 Id-l
At 80% (176OF) 296-+32 Cl
NmJE4G
SERVICE POINTS OF INSTALLATION
1. INSTALLATION OF THERM0 SWITCH/Z. ENGINE
COOLANT TEMPERATURE SWITCH/3. ENGINE COOL-
ANT TEMPERATURE SENSOR/4. ENGINE COOLANT
TEMPERATURE GAUGE UNIT
Apply sealant to threaded portion and tighten.
Specified sealant : 3M ART Part No. 8660 or equivalent
Оригинальная страница руководства
