1991-Montero-Service-Manual · 3.0l v6 · страница 11 из 40 · Открыть оригинал PDF ↗
pulley and mounting bracket. Remove A/C compressor with hoses
connected, and remove mounting bracket. Remove cooling fan bracket
assembly. Note location and length of bolts for reassembly reference.
3) Remove No. 1 and No. 2 timing belt upper outer covers and
gaskets. See Fig. 7. Remove timing belt lower outer cover and gaskets.
Using Holder (MB998747) and a used "V" belt, remove crankshaft pulley
bolt. Remove crankshaft pulley.
NOTE: "V" belt will be damaged by tool. DO NOT use engine "V"
belt to hold crankshaft pulley unless replacing belt.
4) Remove flange. See Fig. 7. Rotate crankshaft and align all
timing marks. See Fig. 8. Loosen belt tensioner bolt, and rotate belt
tensioner counterclockwise to release belt tension.
5) If reusing timing belt, place arrow on belt to indicate
direction of belt rotation. Remove timing belt and belt tensioner. If
camshaft sprocket requires removal, install Holder (MB990775) on
camshaft sprocket. Remove retaining bolt and camshaft sprocket. Remove
rear timing belt cover (if required).
Оригинальная страница руководства
