1991-Montero-Service-Manual · system component tests · страница 4 из 18 · Открыть оригинал PDF ↗
INTAKE AIR TEMP SENSOR RESISTANCE TABLE
Temperature
°F (°C) Ohms
All Models
32 (0) ........................ 6000
68 (20) ....................... 2700
176 (80) ....................... 400
MOTOR POSITION SENSOR
NOTE: Some engines are not equipped with Motor Position Sensor
(MPS). MPS may be a separate unit mounted to throttle body
or it may be incorporated in ISC motor assembly, depending
upon vehicle application.
Pickup 2.4L & Ram-50 2.4L
1) Disconnect MPS connector. See Fig. 2. Connect ohmmeter
lead to ground. Connect other ohmmeter lead to terminal No. 3 of
sensor connector. If continuity is not present, repair wiring harness
as necessary. If continuity is present, go to next step.
Fig. 2: Motor Pos. Sensor Connector Term. ID
Courtesy of Mitsubishi Motor Sales of America.
2) Connect ohmmeter leads to terminals No. 2 and 3.
Resistance should be 4000-6000 ohms. If resistance is not within
Оригинальная страница руководства
