Pajero II Workshop Manual 1998 Supplement · ENGINE <6G7> · страница 25 из 25 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

REMOVAL SERVICE POINTS PoWER STEERING OIL PUMP ASSEMBLYAC COMPRESSOR ASSEMBLY REMOVAL

Remove the oil pump and air conditioning compressor (with
the hose attached)

NOTE

Suspend the removed oil pump (by using wire or similar
material) at a place where no damage will be caused during
removalinstallation of the engine assembly:

ENGINE OIL COOLER HOSE DISCONNECTION

Use a spanner r similar tool to disconnect the oil cooler hose

ENGINE ASSEMBLY REMOVAL

Check that all cables, hoses, harness connectors, etc. are
disconnected from the engine_

(2)Lift the chain block slowly to remove the engine assembly
upward fromtheengine compartment:

INSTALLATION SERVICE POINTS

ENGINE ASSEMBLY INSTALLATION

Install the engine assembly: When doing so, check carefully
that all pipes and hoses are connected, and that none are
twisted, damaged, etc.

ENGINE OIL COOLER HOSE CONNECTION

Use a spanner or similar tool to connect the oil cooler hose.

Оригинальная страница руководства