1998 · BODY [42] · страница 5 из 14 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

Inspection Procedure 3

Passenger'$ side and rear power windows cannot be
operated by the power window main switch: (However,they
can be operated by the power window sub-switches )

The cause may be open circuit or short circuit inthe communication line betweenMalfunction of wiring harness or connector
power window main switch , passengers side power window motor-ECUandrear
power window motor-ECU:

Inspection Procedure 4

Passenger's side and rear power windows cannot be
operated by the power window sub-switches: (However,they
can be operated by the power window main switch )

The cause may be a malfunction of the power window sub-switch.

Malfunction of power window sub-switch

Replace the power window sub-switch

Inspection Procedure 5

When the glass is raised; it then lowers automatically:

If the sliding resistance is too largewhenIhe glass is being raised, it is judged that
something is jammed in the window,andthe window is lowered by approximately
150 mm.

Incorrect window glass adjustment
Glass slider is incorrectly installed or warped

Doestheglass move in the opposite direction when the power
window drive current is above the following value? (Refer to P.42-
Drive current: 5 * 1A

NO
Replace the power window motor-ECU:

Оригинальная страница руководства