1984-Montero · brakes a · страница 19 из 29 · Открыть оригинал PDF ↗
Disassembly
1. Remove the boot ring from the caliper body.
2. Remove the piston and dust boot by applying com-
pressed air through the brake hose fitting hole.
Caution
1. Place a rag in front of ‘the piston to catch it when it
comes out, and slowly increase the amount of com-
pressed air being applied behind the piston.
2. ‘Be sure to keep your fingers away from the front of
the piston during removal.
3. Remove the piston seal. (E 14620)
Caution
Be careful not to damage the caliper bore. The piston seal
must be replaced with a new one.
4. Clean the caliper bore with alcohol or brake fluid.
Проверка
1. Check mounting support for cracks.
2. Check caliper body for cracks or rust of cylinder portion.
3. Check piston for rust.
4. Check piston seal for wear or deterioration.
5. Check piston boot for cracks or deterioration.
Оригинальная страница руководства
