1984-Montero · brakes a · страница 20 из 29 · Открыть оригинал PDF ↗
Reassembly
1. Apply the specified brake grease to a new ‘piston seal and
install the seal to the cylinder.
Recommended brake grease . . . . . . . . . . . . . . , , . .
Repair kit grease (red)
2. Apply the brake fluid td the outside surface of the piston
and slowly insert the piston by hand, taking care not
to twist it. (Y 14 184)
Recommended brake fluid . . . . . . . . . . . . . . .’ DOT 3
I
3. Apply the specified brake grease to the piston boot
mounting groove in the caliper body. (Y 14541)
Recommended brake grease . . . . . . . . . . . . . . . . . .
Repair kit grease (orange)
4. Install the piston boot and retain it with the boot ring.
Installation
1. Bleed the air from the caliper.
2. Check the brake drag. (Refer to p. 5-18.)
: :
BRAKE DISC
Inspection
BRAKE DISC WEAR
If the brake disc thickness becomes less than the service limit,
replace the disc. ( 14F6 11)
Disc thickness [Service limit] . . . . .18.4 mm 1(.72 in.)
BRAKE DISC DAMAGE
Replace the brake disc if necessary.
S-20
Оригинальная страница руководства
