1987-Montero · power steering a · страница 2 из 41 · Открыть оригинал PDF ↗
Общие сведения
A tilt steering system in which the steering column can be adjusted in four steps of 3” each for the most
suitable driving position has been adopted.
A ball-and-nut type (variable-ratio gear) manual steering gear box has been adopted; it features excellent wear
resistance and withstand resistance to impact shocks from the road surface, and assures excellent operation
of the steering system.
In addition, an integral type of power steering gear box has been adopted which reduces the required steer-
ing force during full-angle turns and during low-speed driving.
Технические характеристики
Общие технические характеристики
NlOCA--
| Items | Specifications |
|---|---|
| Steering wheel diameter mm (in.) | 380 (14.9) |
| Power steering gear box | |
| Steering gear type | Ball and nut, torsion bar type (integral type) |
| Steering gear ratio | 16.4 |
| Oil pump | |
| Oil pump type Displacement cc/:ev. (cu.in./rev.) | Vane type 9.6 (.59) |

Номинальные и предельные значения
NlOCB--
| items | Specifications - |
|---|---|
| Standard value Steering wheel free play mm (in.) | 25 (.98) or less |
| Steering angle | |
| Inner wheel | 32”30’0 |
| Outer wheel | ..,, 29”OO’ |
| Steering gear oil level mm (in.) | 25 l.98) |
| Stationary steering effort N (Ibs.) | 37 (8.2) |
| Drive belt tension mm (in.) | 9-l 2 (.35-.47) |
| Oil pump pressure kPa (psi) | |
| Gauge hose valve closed | 7,500-8,200 (1,067-l ,I 66) |
| Gauge hose valve opened | 980 (142) or less |
| Mainshaft starting torque Ncm (in.lbs.) | 25-65 (2-6) |
| Cross-shaft end play mm (in.) | 0.05 (.0020) |
| Mainshaft total starting torque Ncm (in.lbs.) | 50-90 (4-8) |
| Backlash between ball groove of rack piston and | 0.05-o. 1 (.0020-,004) |
| balls mm (in.) Ball joint starting torque Ncm (in.lbs.) | 100-300 (8.9-26) |
| Idler arm turning torque Ncm (in.lbs.) | 300-900 (26-78) |
| Spring balance reading N (Ibs.) | 25-75 (5.5-16.5) |





