1987-Montero · power steering a · страница 26 из 41 · Открыть оригинал PDF ↗
SERVICE POINTS OF DISASSEMBLY
2. REMOVAL OF PITMAN ARM
Remove the pitman arm from the gear box assembly by
using the special tool.
5. REMOVAL OF BREATHER PLUG
Remove the breather plug, and drain the steering gear oil.
8. REMOVAL OF ADJUSTING BOLT LOCK NUT
Loosen the lock nut of the adjusting bolt and screw in the
adjusting bolt so that the side cover raises slightly.
9. REMOVAL OF CROSS-SHAFT
With the mainshaft and cross-shaft placed in the straight
ahead position, tap the bottom of the cross-shaft with a
plastic hammer to take out the cross-shaft together with
the side cover.
10. REMOj/AL OF ADJUSTING BOLT
.+gg~-
Remove the side cover by turnrng3be adjusting bolt.
_ XT I
13. REMOVAL OF U-tiAC$%JG
Do not remove the U-packing at the rear of the needle
bearing unless there is fluid leakage from the threads of
the adjusting bolt. If there is leakage, replace the U-
packing with a new one.
Remove the valve housing lock nut by using the special
tool.
REMOVAL OF VALVE HOUSING
Remove the valve housing together with the rack piston.
Caution
Use care not to drop the rack piston.
Оригинальная страница руководства
