1987-Montero · power steering a · страница 3 из 41 · Открыть оригинал PDF ↗
| Items | Specifications | ||
|---|---|---|---|
| Limit | |||
| Steering wheel free play mm (in.) | 50 (2.0) | ||
| Steering gear backlash mm (in.) | 0.5 (.02) | ||
| Bail joint end play mm (in.) | 1.5 (.06) | ||
| Oil pump pressure kPa (psi) | |||
| Gauge hose valve closed | 1,500 (218) | ||
| Backlash between ball groove of rack piston and balls | mm (in.) | 0.2 (.008) | |
| Clearance between oil pump drive shaft and bushing | mm (in.) | 0.1 (.004) |
Таблица в оригинале
Моменты затяжки
NlOCC--
| Items | Nm | ft.lbs. | ||
|---|---|---|---|---|
| Steering column and shaft | ||||
| Steering wheel lock nut | 35-45 | 25-33 | ||
| Steering column A to steering column B | 20-25 | 14-18 | ||
| Column tube clamp | 8-10 | 6-7 | ||
| Dash panel cover | 3-5 | 2-4 | ||
| Steering shaft A to steering shaft B | 15-20 | 11-15 | ||
| Steering shaft B to joint assembly | 30-35 | 22-25 | ||
| Joint assembly to steering gear box | 30-35 | 22-25 | ||
| Plate | 18-25 | 13-18 | ||
| Power steering gear box | ||||
| Gear box installation | 55-65 | 40-47 | ||
| Gear box to joint assembly | 30-35 | 22-25 | ||
| Pitman arm to relay rod | 45 | 33 | ||
| Gear box to hose pressure | 40-50 | 29-36 | ||
| Gear box to return hose | 30-40 | 22-29 | ||
| Side cover | 45-55 | 33-40 | ||
| Adjusting bolt lock nut | 30-45 | 22-33 | ||
| Breather plug | 3-4 | 2-3 | ||
| Pitman arm installation | 130-I 50 | 94-l 08 | ||
| Circulators installation | 3.5-4.5 | 2.5-3.2 | ||
| Valve housing Lock nut* | 45-55 180-230” | 33-40 130-I 66” |
Таблица в оригинале
NOTE
* If the special tool is used to measure the tightening torque, the measurement is 135-175 Nm (98-l 27 ftlbs.).
Оригинальная страница руководства
