1989-Montero · Рулевое управление с усилителем · страница 3 из 40 · Открыть оригинал PDF ↗
Моменты затяжки
NWCC-
| Items | Nm | ft.lbs. |
|---|---|---|
| Steering column and shaft | ||
| Steering wheel lock nut | 3M5 | 25-33 |
| Steering column A to steering column B | 20-25 | 14-28 |
| Column tube clamp | 8-10 | 6-7 |
| Dash panel cover | 3-5 | 2-4 |
| Steering shaft A to steering shaft B | 15-20 | 11-15 |
| Steering shaft B to joint assembly | 30-35 | 22-25 |
| Joint assembly to steering gear box | 30-35 | 22-25 |
| Plate to instrument panel reinforcement | 18-25 | 13-18 |
| Power steering gear box | ||
| Gear box installation | 55-65 | 40-47 |
| Gear box to joint assembly | 36-35 | 22-25 |
| Pitman arm to relay rod | 45 | 33 |
| Gear box to pressure hose | 30-40 | 22-29 |
| Gear box to return hose | 40-50 | 29-36 |
| Side cover | 45-55 | 33-40 |
| Adjusting bolt lock nut | 30-45 | 22-33 |
| Breather plug | 3-4 | 2-3 |
| Pitman arm installation | 136-l 50 | 94-108 |
| Valve housing | 45-55 | 33-40 |
| Valve housing lock nut* | 18Q-230* | 136-166’ |
| Oil pump | ||
| <2.6L Engine> | ||
| Oil pump bracket to engine | ||
| Front | 14-21 | IO-15 |
| Right side | ||
| Front | 14-21 | IO-15 |
| Rear | 2741 | 20-30 |
| Oil pump to pressure hose | 16-24 | 12-17 |
| Oil reservoir to reservoir bracket | 6-10 | 4-7 |
| Oil reservoir to oil pump body | 1 a22 | 13-16 |
| Oil pump body to oil pump bracket | 25-33 | 18-24 |
| <3.OL Engine> | ||
| Oil pump bracket to engine | 3545 | 25-33 |
| Oil pump to oil pump bracket | 35-45 | 25-33 |
| Oil pump to pressure hose | 16-24 | 12-17 |
| Oil pump to pressure switch | 2530 | 18-22 |
| Connector to oil pump body | 40-60 | 29-43 |
| Suction plate to oil pump body | 6-10 | 4-7 |
| Pump cover to oil pump body | 18-22 | 13-16 |
Таблица в оригинале
NOTE
* If the special tool is used to measure the tightening torque, the measurement is 135-175 Nm (98-127 ft.lbs.).
Оригинальная страница руководства
