1989-Montero · emission system · страница 35 из 38 · Открыть оригинал PDF ↗
EGR CONTROL SOLENOID VALVE <Vehicles with a manual transmission>
INSPECTION
NmBR
NOTE
When disconnecting the vacuum hose, make an identification
mark on it so that it can be reconnected to the original position.
(I) Disconnect the vacuum hose (yellow and green stripe)
from the solenoid valve.
(2) Disconnect the harness connector.
(3) Connect a hand vacuum pump to the nipple to which the
green striped vacuum hose was connected.
(4) Apply a vacuum and check for air-tightness when voltage
a&ikd directly to the purge-control solenoid valve when
the voltage is discontinued.
(5) Measure the resistance between the terminals of the
solenoid valve.
Standard value : 3644 R [at 20°C (66”F)l
Оригинальная страница руководства
