1989-Montero · engine 2'6 · страница 6 из 55 · Открыть оригинал PDF ↗
---- ENGINE ---- <2AL> --.--- - Saecificatiann -r- -___- --_-__-
| Items | Standard value | Limit |
|---|---|---|
| Right silent shaft | ||
| Front journal diameter mm (in.) | 21 (.83) | |
| Rear journal diameter mm (in.) | 43 (I .69) | |
| Oil clearance mm (in.) Rear | 0.094-0.135(.0037-.0053) | |
| Front journal diameter mm (in.) | 23i.91) | |
| Rear journal diameter mm (in.) | 43(1.69) | |
| Oil clearance mm (in.) | ||
| Front | 0.020-0.062 (.0008-.0024) | |
| Rear | 0.094-0.135 (.0037-.0053) | |
| Piston | ||
| O.D. mm (in.) | 91 .I (3.587) | |
| Clearance (piston-to-cylinder) mm (in.) | 0.02-0.04 (.0008-.0016) | |
| Ring groove width mm (in.) | ||
| No. 1 and No. 2 | 1.5 (.059) | |
| Oil | 4.0(.157) | |
| Service size mm (in.) | 0.25 (.OlO), 0.50 (.020), 0.75 (.030), 1 .OO (039) Oversize | |
| Piston ring | ||
| Side clearance mm (in.) | ||
| No. 1 | 0.05-0.09 (.0020:0035) | 0.12 (0047) |
| No. 2 | 0.02-0.06 (.OOOS--0024) | 0.10 (.0039) |
| End gap mm (in.) | ||
| No. 1 | 0.30-0.45 (.Ol IS-.0777) | 0.8 (031) |
| No. 2 | 0.25-0.40 (.0098-.0157) | 0.8(.031) |
| Oil ring side rail | 0.30-0.80 (01 l&.0315) | 1 .o (039) |
| Service size mm (in.) | 0.25 (.OlO), 0.50 (.020). 0.75 (030). 1 .OO (039) Oversize -- | |
| Connecting rod | ||
| Bend mm (in.) | 0.05(.0020) or less | |
| Twist mm (in.) | 0.10 (.0039) or less | |
| Connecting rod big end to crankshaft side clearance mm (in.) | 0.10-0.25 (.0039-.009B) | 0.4(.016) |
| Piston pin press-in load N (Ibs.) | 7.500-17.500 (1.653-3.858) | |
| Connecting rod bearing | ||
| Oil clearance mm (in.) | 0.019-0.056 (.0007-.0822) | 0.1 1.004) |
| Service size mm (in.) -. | 0.25 (.OlO). 0.50 (020). 0.75 (.030) Undersize | |
| Crankshaft main bearing | ||
| Oil clearance mm (in.) | 0.021-0.046(.0008-.oDlS) | 0.1 (004) |
| Service size mm (in.) | 0.25 (.OlO). 0.50 (.020). 0.75 (.030) Undersize |
Таблица в оригинале
Оригинальная страница руководства
