1989-Montero · heaters AC · страница 8 из 16 · Открыть оригинал PDF ↗
6. Disconnect the water valve control wire from the blend air
damper lever and the heater unit’s clip.
7. Remove the water valve_cover.
8. Remove the piping clamp.
9. Unfasten the clip of blend air damper lever, and discon-
nect the link for the water valve lever from the blend air
damoer lever.
10. Remove the joint hose clamp.
11. Cut the joint hose.
12. Remove the water valve from the heater core.
13. Apply a coating of soapywater to the inside surface of the
new joint hoses, and then connect them to the pipe part
of the water valve and the heater core.
14. Connect the link, and then install the heater cover.
15. Close the radiator drain plug and refill the engine cooling
system with coolant.
16. Check operation. -
Оригинальная страница руководства
