1989-Montero · heaters AC · страница 12 из 16 · Открыть оригинал PDF ↗
HEATER CORE REPLACEMENT
1. Remove the water valve cover.
2. Remove the fcllowing parts to remove the water valve.
(1) Piping clamp
(2) Water valve link
(3) Joint hose clamp
(4) Joint hose
(5) Screw
3. Remove the FOOT/DEF-damper link from the mode
selection damper lever.
4. Move the damper lever to the position at which the mode
selection damper lever does not protrude very much to the
heater core side.
5.. Remove the heater core. If at this time the damper lever
and heater core are in contact, making removal difficult,
remove the damper lever.
Caution
To prevent interference between the heater core and
case, use care not to peel the heater core felt away
when the heater core is removed.
6. After installing the heatercore and water valve, install the
link for each damper after referring to the ‘Service
adjustment procedures” section.
SERVICE POINTS OF INSTALLATION
2. INSTALLATION OF INSTRUMENT PANEL
Refer to GROUP 23 - Instrument Panel.
Оригинальная страница руководства
