1989-Montero · heaters AC · страница 10 из 16 · Открыть оригинал PDF ↗
SERVICE POINTS OF INSTALLATION -
11. APPLICATION OF GREASE TO HEATER CONTROL AS-
SEMBLY
Apply the multipurpose grease to all the moving parts of
the heater control assembly.
9. INSTALLATION OF MODE SELECTlON CONTROL WIRE
Connect the mode selection control wire to the mode
selection damper lever by following the steps below.
(1) Move the mode selection lever to the-Z position.
(2) With the mode selection damper lever pressed inward
in the direction indicatecl by the arrow, connect the
inner cable of the mode selection control wire to the
end of the mode selection lever, and then secure the
outer cable by using a clip.
2. INSTALLATION OF AIR SELECTION CONTROL WIRE
Connect the air selection control wire to the air selection
damper lever by following the steps below.
(1) Move the air selection control lever to the &3 position.
(2) With the air selection damper lever pressed inward in
the direction indicated by the arrow, connect the inner
cable of the air selection control wire to the end of the
air selection lever, and then secure the outer cable by
using a clip.
Оригинальная страница руководства
