Pajero II Workshop Manual 1991 · Электрооборудование автомобиля · страница 19 из 72 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

FUEL GAUGE UNIT INSPECTION

Tocheck,remove fuel gaugeunit from fuel tank
(Refer to GROUP13Fuel Tank.)

Fuel GaugeUnit Resistance
(1)Checkthatresistancevaluebetweenthefuelgauge
terminal and earth terminal is at standard value when fuel
gauge unit float is at point F (highest) and point E (lowest)
Standard value:Point F3+2 n
Point E110 +7

(2) Check that resistance value changes smoothly when float
moves slowly between point(highest)andpoint
(lowest):

Fuel Gauge Unit Float Height

Movefloatand measure (he height A at point F (highest) and
B at pointE (lowest) with float arm touching stopper.

Standard value:

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

Body type] IItems	Standard wheelbase	Long wheelbase
mm (in.	118. (4.64)	119.3 (4.961
B mm (in	263 (10.35)	255.0 (10.03)

FUEL LEVEL SENSOR INSPECTION

Connect fuel gauge unit to battery via test lamp (12V-3.4W).
Immerse in water. Condition good if lamp goes off when unit
thermistor is in water and lights when unit is removedfrom
water.

Caution

After completing this test, wipe the unitdryand install it in
the fuel tank

Оригинальная страница руководства