Pajero II Workshop Manual 1991 · Электрооборудование автомобиля · страница 29 из 72 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

(4) Set the distance between the screen and the centre of the
headlamps as shown in the illustration.
(5)With the engine running at 2,000 rlmin;aimthe head-
lamps.

(6) Check if the lower beam shining onto the screen is at the
standard value.

Standard value:

Vertical direction >

60 mm (2.36 in,) below the horizontal line (H)
<Horizontal direction >

Position where the 158 sloping section intersects the
vertical line (V)

Caution

When making the aiming adjustment, be sure to mask
whicharenot
those lampsbeing adjusted
When it is difficult, because of outside light, to distin-
guishthe light/dark dividing line, use a curtain, screen
Orsimilar material to reduce the effects of the outside
light:

Alternately turn the adjusting screw to adjust the head-
lamp aiming
Caution

Be sure to adjust theaiming adjustment screw in the
tightening direction:

INTENSITY MEASUREMENT

Usinga photometer, and following its manufacturer's instruc
tion manual, measure the headlamp intensity and check to be
sure that the limit value issatisfied.

Limit: 30,000 cdormore

Оригинальная страница руководства