Pajero II Workshop Manual 1991 · Система пассивной безопасности (SRS) · страница 18 из 47 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

SRS warning lamp drive circuit
Code No. 43system
(Lamp does not illuminate )

IComment]
Inisdiagnosis code is output when a opencircuit occurs forcontinuous period
of 5 seconds while Ihe SDU is monitoring the SRS warning lamp ard the lamp is
OFF (transistor OFFI:

Probable cause

Malfunction of harnesses or connectors
Blownbulb
MalfurctionSDU
Malfunction of combination meter

However;ii this codcoutput ducopencircuitthevehiclecordition
returnsto normalfor acontinuous period Qf 5 - 0.2secondsthisdiagnosis code
wilbe automatically erasedand the SRS warning lamp will return to normal,

Turn the ignitionkeyto theLOCKposition, disconnect
the negative battery cable and tape the terminal.
Caution

Wait at least 60 seconds afterdisconnecting the bat-
tery cable before doing any further work: (Refer to
P 52B-4)

Remove the floor console assembly: (Refer to GROUP
52AFloor Console.

Place a flat-tipped (~) screwdriver against the lock spring
(metal portion) of the SDU connector lock lever; and push
the spring horizontally toward the inside of the unit

Caution

Do not use excessive force to raise the lock lever
(green)

Do not insert the screwdriverintothe gap between
the lock lever (green) and the lock spring (metal
portion).

Disconnect the red14-pin connector from the SDU.

Mitsublshi Motors CorporatlonDoc1993

Оригинальная страница руководства