Pajero II Workshop Manual 1991 · Система пассивной безопасности (SRS) · страница 21 из 47 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Code No. 45
IComment]
SDU non-volatile memory (EEPROM)
and A/D converter system
Probable cause
Malfunction of SDU
This diagnosis code is output if there is & malfunction in the SDU non-volatile memory
(EEPROM)or AD converter:

Turn the ignitionkeyto theLOCK'position, disconnect
the negative battery cable and tape the terminal.
Caution
Wait at least 60 seconds after disconnecting the bat-
terycable before doing any further work (Refer to
P 52B-4)
Remove the floor console assembly. (Refer to GROUP
52AFloor Console:
3_Place a flat-tipped (~) screwdriver against the lock spring
(metal portion) of the SDU connector lock lever; and push
the spring horizontally towardthe inside of the unit
Caution
Do not use excessive force to raise the lock lever
(green) _
Do not insert the screwdriver into the gap between
the Iock lever (green) and the lock spring (metal
portion):
Disconnect the red14-pin connector from theSDU.
orAD converter
The SDU non-volatile memory (EEPROM)
is probably defective, so replace the SDU.
