MANUALS · INTAKE AND EXHAUST [15] · страница 4 из 30 · Открыть оригинал PDF ↗

Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.

INTAKE MANIFOLD VACUUM INSPECTIONEISFBAB
Refer to GROUP 11Service Adjustment Procedures:
SUPERCHARGING PRESSURE CONTROL SYS-
TEM INSPECTION < Vehicles with supercharging
pressure relief solenoid valve>>

(1) Remove the vacuum hose (yellow) from the supercharging
pressure relief solenoid valve and plug the hose.

(2) Connect a hand vacuum pump to the supercharging pres-
sure relief solenoid valve.

(3) Check the vacuum condition:

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

Engine condition	Normal condition
Idling	0 mmHg
2,000 (/min	300 mmHg (12 inHg) or more

SUPERCHARGING PRESSURE RELIEF SOLENOID VALVE INSPECTION < Vehicles with supercharging pressure relief solenoid valve>

OPERATION INSPECTION

(1) Connecthandvacuumpumptothesolenoidvalve
nipple(see the illustration to the left):

(2) Usingjumper wire, connect between the solenoid valve
terminal and battery terminal.

(3) Connecting and disconnecting the jumper wire at the battery
negativeterminaltoapplynegativvepressurecheck
tightness

Таблица в оригинале

Распознанный текст таблицы — требует сверки с оригиналом

Jumper wire	nipple condition	Normal condition
Connected	Open	Negative pressure leaks
	Close	Negative pressure is held.
Disconnected	Open	Negative pressure is held,

COIL RESISTANCE INSPECTION

Measure resistance between solenoid valve terminals:
Standard value: 3644 n [at 20*€ (68PF)]

Mitsubishi Motors CorporationDec1993

Оригинальная страница руководства