MANUALS · FRONT SUSPENSION [33] · страница 7 из 28 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Troubleshooting<Remote
controlled variable shock absorbers >
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Trouble | Inspection | Diag | nosis | Probable cause |
|---|---|---|---|---|
| Symptom | Normal | Problem | ||
| Even when switched H (hard) mode the indicator does not illuminate. | Remove the shock absorber control switch connector and earth the harness connector 6 terminal: No. | The indicator illuminates | The indicator remains off | Broken wire in fuse No. 11 in the junction block Light-emitting diode is defective Broken harness wire between the combination meter and either the junction block or the shock absorber control switch |
| (2) Remove the shock absorber control connector and check for switch continuity between switch connector terminals No_ and 2 when the No. switch is set to H (hard): | Continuity | No continuity | Shock absorber control switch is defective | |
| When the results of inspection items (1) (3) and (2} are normal; | Broken harness wire between the shock absorber control switch and the earth Earth connection is defective |
TROUBLESHOOTING CHART
[2] (MALFUNCTION RELATED TO THE DAMPERS)
When the front or rear left and right mutual damping
forcesdo notchzegetweenthe problem is probablythe problem is probably
broken harnesswirethe actuator and either
the shock absorber control unit or the shock absorber
control switch,so the harness should be checked
first,
Оригинальная страница руководства
