MANUALS · FRONT SUSPENSION [33] · страница 9 из 28 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
Troubleshooting <Remote controlled variable shock absorbers >
SHOCKABSORBERCONTROLUNITSIGNALCIRCUIT
INSPECTION
(1)Remove the shock absorber control unit connector, and
inspect the harness-side connector.
12E0032
BV: Battery Voltage
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Terminal No | Connection destination | Measure- ment | Tester connection | Check con | dition | Standard |
|---|---|---|---|---|---|---|
| Earth | Continuity | Earth | Consta | ntly | Continuity | |
| S (Soft mode) | No continuity | |||||
| Shcok absorber control switch (Hard) | Continuity | Earth | Shcok absorber control condition switch | M (Medium mode) | No continuity | |
| H (Hard mode) | Continuity | |||||
| S (Soft mode} | No continuity | |||||
| Shcok absorber control switch (Medium) | Continuity | Earth | Shcok absorber control switch condition | M (Medium mode) | Continuity | |
| H (Hard mode) | No continuity | |||||
| S (Soft mode) | Continuity | |||||
| Shcok absorber control switch (Soft) | Continuity | Earth | Shcok absorber control switch condition | M (Medium mode) | No continuity | |
| H (Hard mode) | No continuity | |||||
| l | Eth | OFF | 0 V | |||
| Power supply | Votage | ar | Ignition switch | ON | BV |
(2} Connect the shock absorber control unit ad inspect
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Terminal No | Connection destination | Measure- ment | Tester connection | Check condition | Standard |
|---|---|---|---|---|---|
| Shock absorber | Voltage | Earth | 5 seconds after operating the shock absorber control switch | Approx: 12 V | |
| actuator | Conditions except for above | 0 V |
Оригинальная страница руководства
