Pajero II Workshop Manual 1991 · Отопление, кондиционирование и вентиляция · страница 85 из 118 · Открыть оригинал PDF ↗
Текст распознан со скана. Числа и обозначения можно сверить с оригиналом ниже.
DUAL AIR CONDITIONER
Таблица в оригинале
Распознанный текст таблицы — требует сверки с оригиналом
| Garage ambient temperature | "C (PF) | 21 (701 | 26.7 (801 | 32.2 (90) | 37.8 (100) | 43.3 (110) |
|---|---|---|---|---|---|---|
| Discharge air | Front | 2-8 (35-46) | 3-9 (37-48) | 4-10 (39-50) | 7-14 (45-571 | 12-18 (54-64) |
| temperature "C (PF) | Rear | 2-8 (35-46) | 3-9 (37-48) | 4-10 (39-50) | 7-14 (45-57) | 12-18 (54-64) |
| Compressor discha (kgi kPa pressure | rge cm? , psi) | 981-1,373 (9.81-13.73 142-1991 | 981-1,373 (9.81-13.73, 142-199) | 1,079-1,472 (10.79-14.72, 156-213) | 1,373-1,766 (13.73-17.66, 199-2561 | 1,668-2,060 (16.68-20.06, 242-2991 |
| Compressor suctio kPa (kgl pressure | n cm? , psi) | 108-206 (1.08-2.06, 16-30) | 108-206 (1.08-2.06, 16-30) | 128 226 (1.28-2.26, 18-331 | 206-304 (2.06-3.04, 30-44) | 226-324 (2.26-3.24, 33-47) |
VehiclesusingR-134a refrigerant >
(1) The vehicles to be tested should be ina place that is not in
directsunlight:
(2) Closethehighandlowpressurevalveofthegauge
manifold,.
(3) Connect the charging hose (blue) to the low pressure valve
and connect the charging hose (red) to the high pressure
valve of the gauge manifold:
(4) Install the quick joint (for low pressure) to the charging hose
(blue), and connect the quick joint (for high pressure) to the
charging hose (red):
(5) Connectthequick joint (forlowpressure)tothelow-
pressure service valve and connect the quick joint (for high
pressure) to the high-pressure service valve
NOTE
The high pressure service valve is on high-pressure pipe B,
and the low-pressure service valve is on the low-pressure
hose.
Caution
Toconnectthequick joint,press sectionfirmly
against the service valve until a click is heard:
When connecting;run your handalongthe hose while
pressing to ensure that there are no bends in the hose_
(6) Start the engine.
Set the A/C controls as follows:
A/C switch: A/CON position
Mode selection: Face position
Temperature control: Max cooling position
Air selection: Recirculation position
Blower switch: Hl (Fast) position
(8) Adjust enginespeedto1,000r/minwithA/Cclutch
engaged.
(9) Engineshouldbewarmedupwithdoors and windows
closed.
(10) Insertthermometerintheleftcenter A/Coutletand
operate the engine for 20 minutes.
Note the discharge air temperature:
NOTE
theclutch cycles,takethe readingbeforetheclutch
disengages.
PWJE9086-DREVISED
REVISED
Оригинальная страница руководства
