Service Bulletins · MSB98E37002e · страница 2 из 12 · Открыть оригинал PDF ↗
| Items | Specifications | |
|---|---|---|
| Pressure switch activation oil pressure | Mpa (kg/cm2, psi) | |
| OFF → ON | 1.5 – 2.0 (15 – 20, 21-284) | |
| ON→ OFF | 0.7 – 1.2 (7.2 – 12, 100-171) | |
| Mainshaft starting torque (Manual steering) | ||
| <Deleted> | Nm (kgcm, in.lbs.) | 0.35 – 0.55 (3.5 – 5.5, 3 – 5) |
| Mainshaft axial play (Power steering) | mm (in.) | 0.03 – (0.0012) or less |
| Cross-shaft axial play | mm (in.) | |
| Manual steering’ | 0.05 (0.0020) | |
| Power steering | 0.05 (0.0020) | |
| Mainshaft total starting torque | Nm (kgcm, in.lbs.) | |
| Manual steering | 0.65 – 0.85 (6.5 – 8.5, 5.7 – 7.3) | |
| Power steering | 0.45 – 1.25 (4.5 – 12, 5, 4 – 11) | |
| Ball joint starting torque | Nm (kgcm, in.lbs.) | |
| Tie rod end | 1 – 3 (10 – 30, 8.9 – 26) | |
| Idler arm | 0.5 – 2.0 (5 – 520, 4 – 17) | |
| Idler arm turning torque | Nm (kgcm, in.lbs.) | 0.3 – 2.0 (3 – 20, 3 – 17) |
| Spring balance reading | N (kg,lbs) | 2.3 – 15.4 (0.23 – 1.54, 0.5 – 33.9) |
| Limit | ||
| Steering wheel free play | mm (in.) | |
| Manual steering | 50 (1.97) | |
| Power steering | 50 (1.97) | |
| Steering gear backlash | mm (in.) | 0.5 (0.020) |
| Ball joint axia play | mm (in.) | 1.5 (0.059) |
| Backlash between ball groove of rack piston | ||
| And balls | mm (in.) | 0.05 (0.0020) |
| Gap between vane and rotor groove | mm (in.) | 0.06 (0.0024) |
| Clearance between oil pump drive shaft | ||
| And pump body | mm (in.) | 0.1 (0.004) |
Таблица в оригинале
Оригинальная страница руководства
