Service Bulletins · MSB98E37002e · страница 11 из 12 · Открыть оригинал PDF ↗
<Deleted>
13. INSTALLATION OF LOCK NUT
Using the special tool,tighten carefully until the lock nut
contacts the bearing race.
•ADJUSTMENT OF MAIN SHAFT AXIAL PLAY
(1) Adjust the play by tightening the lock nut gradually so
that the mainshaft axial play will meet the range of
standard value.
Standard value:0.03 mm (0.0012 in.) or less
(2) Use a punch to crimp the circumference of the lock nut
so as to secure the lock nut.
(3) Check to be sure that the mainshaft rotates smoothly.
16. INSTALLATION OF RACK PISTON
(1) Install the rack piston until it comes in contact with the
edge of the main shaft.
(2) Rotate the main shaft to align the ball raceway with the
19-ball insertion hole.
NOTE
The balls must be inserted so that there is no clearance
between the balls.
(3) Set the remaining seven balls in the circulator, and
install the circulator to the rack piston.
Оригинальная страница руководства
