1987-Montero · Brakes a · страница 24 из 41 · Открыть оригинал PDF ↗
(4) Obtain the clearance (A) between the brake booster
push rod and the primary piston from the values
obtained in (I), (2) and (3) previously.
Standard value : 0.1-0.5 mm (.00&.020 in.)
(5) If the clearance is not within the standard value range,
adjust by changing the push rod length by turning the
screw of the push rod.
Caution
Improper clearance may cause excessive brake drag.
,
Оригинальная страница руководства
