1987-Montero · Brakes a · страница 30 из 41 · Открыть оригинал PDF ↗
SERVICE POINTS OF REMOVAL
NOBLBCA
1. DISCONNECTION OF BRAKE HOSE
Refer to P.5-28.
4. REMOVAL OF STOPPER PLUG
Pull the stopper plug out to the side by using pliers.
6. REMOVAL OF CALIPER ASSEMBLY
Remove the caliper assembly by moving it upward or
downward at an angle.
NOTE
Hold the front brake assembly by suspending it with wires
or other suitable means in such a manner that the brake
hose is not twisted.
8. REMOVAL OF BOOT RING
Remove the boot ring by using a screwdriver.
9. REMOVAL OF PISTON BOOT/IO. PISTON
Remove the piston and piston boot by applying com-
pressed air through the brake hose fitting hole.
Caution
Place a piece of cloth in front of the piston, and slowly
increase the force of the compressed air to prevent the
piston from springing out abruptly.
Il. REMOVAL OF PISTON SEAL
(1) Remove the piston seal from the cylinder by hand.
Caution
Never use a screwdriver or similar tools, because
doing so could damage the cylinder surface.
(2) Clean the caliper bore with trichloroethylene, alcohol or
brake fluid.
zvision
,..
Оригинальная страница руководства
