1987-Montero · Brakes a · страница 38 из 41 · Открыть оригинал PDF ↗
BRAKES - Rear Brake Wheel Cylinder SERVICE POINTS OF REASSEMBLY 4. INSTALLATlON OF PISTON CUP
(1) Wash the inner surface of the wheel cylinder and outer
surface of the piston with trichloroethylene, alcohol or
brake fluid.
(2) Apply the specified brake fluid to the entire surface of
the piston cups and to the external periphery of the
special tool.
Specified brake fluid : DOT 3
Caution
Use a repair kit to replace the piston cup and wheel
cylinder boot.
(3) Attach the special tool to the piston, fit the piston cup
onto the special tool with the lips of the piston cup
directed upward, and push down (with finger tips) to
let it slide along the outer surface of the special tool
until it fits into position.
Caution
When pushing down the piston cup, push uniformly
and slowly with both hands, without stopping, so
that deformation or turning over will not result.
2. APPLICATION OF BRAKE FLUID TO PISTON ASSEMBLY
Apply the specified brake fluid to the inner surface of the
wheel cylinder and to the entire periphery of the piston
cups, and install the piston assemblies.
Specified brake fluid : DOT 3
1. APPLICATION OF GREASE TO WHEEL CYLINDER BOOT
Apply the specified grease to the piston and the wheel
cylinder, and install the boot.
Specified grease : Repair kit grease (orange)
/ STB Revision
Оригинальная страница руководства
