1987-Montero · Intro maint a · страница 9 из 58 · Открыть оригинал PDF ↗
--
PARTS
When replacing parts, use MITSUBISHI genuine parts.
VEHICLE WASHING
If high-pressure car-washing equipment or steam car-washing
equipment is used to wash the vehicle, be sure to maintain th,e,
spray nozzle at a distance of at least 300 mm (11.8 in.) fro,m
any plastic parts and all opening parts (doors, lugg$ge
compartment, etc.). 5
t;
” .“I
SERVICING THE ELECTRICAL SYSTEM
When servicing the electrical system, disconnect the negative
cable terminal from the battery.
Caution
Before connecting or disconnecting’the negative cable, be ‘*,”
sure to turn off the ignition switch and the lighting switch,;~: * : ’
(If this is not done, there is the possibility of semicondu~$$r~ .. I
! I”
parts being damaged.) ;* ’ t&c
:
WIRING HARNESSES
1. Secure the wiring harnesses by using clamps so that there
is no slack. However, for any harness which passes to the: ._
engine or other vibrating parts of the vehicle, allow some.. II :
slack within a range that does not allow the engine c. [:I.:\
vibrations to cause the harness to come into contact with ~~~~~:~:
*.
any of the surrounding parts. Then secure the harness by ’
using a clamp. ‘(7 \
In addition, if a mounting indication mark (yellow tape) is : I
on a harness, secure the indication mark in the specified :‘.‘-i”.
location. $ ‘-*
2. If any section of a wiring harness contacts the edge of a
part, or a corner, wrap the section of the harness with tape ;::
or something similar in order to protect it from damage.
Оригинальная страница руководства
