1987-Montero · Intro maint a · страница 57 из 58 · Открыть оригинал PDF ↗
BALL JOONTS WITH GREASE IPPLE (Lubricate
grease) NOOSBOB
Fill the specified grease at the grease nipple till the grease come
out of the dust seal of the pitman arm, tie rod, lower control arm
and upper control arm.
Specified grease : Multipurpose grease SAE J310, NLGI
No. 2
FRONT WHEEL BEARINGS (Lubricate grease) NOOSBKo ,.I’
Inspect for evidence of grease leakage around the hub cap and the
back of the hub. If there is leakage of grease, remove the hub and I’
inspect its oil seal for damage. Clean the grease off the hub and ( I
bearing and repack with specified new grease.
&
-+
Specified grease : Multipurpose grease SAE 5310, NLGI :. /’ .Q’ ,.(I
No. 2 -.% .d
-1 ” ; , ;;z % i .,.
NOTE : y,+.5
Refer to GROUP 2 FRONT SUSPENSION-Axle Hub and Fre$ . .‘a:
wheeling Hub, for the removal procedures of the front hub. ( I _,‘_ is.’
FRONT AXLE AND REAR AXLE (CONVENTIONAl+: i *;, . t;:“:
NWSBp~; :; ‘L
DIFFERENTIAL)(lnspect oil level) ,’
Remove the filler plug and inspect the oil level at bottom of filler,,:, 8.’
hole. If the oil level is slightly below the filler hole, it is in satisfac-‘r.,., i-i:
‘i :.y I
tory condition. ,‘- ‘;c :1
r
Оригинальная страница руководства
